A range of materials and equipment that perfectly suits for horse stockbreeding : box for stall, horses fencing, round pen panels, feed racks, field gates & panels …
FREE SERVICE FOR HORSES
ADAPTABLE TO THE CONFIGURATION OF THE BUILDING AND TO THE HORSE COLLAR SIZE
- for a mounting without wall – height 1 m 80
- for a mounting on a wall – height 1 m 50
Feeders for horses
4 FACES & BIG BALL
wo models of feeders specialy adapted to horses; Sturdy, main elements are made in pipe ∅ 60 mm. Roof full protection and 3 points protection (composite material) and rigid gutter reinforcing the roof and forming a protection included as standard
– Trough made in steel sheet thickness 20/10ᵉ Trough thickness 20/10e reinforced with two important veins stamped and interior counter fold on the 4 sides (anti-cut), specific to the security of the legs.
– Opening trough edge in the back to facilitate supplying and cleaning.(Patent N° 01 03 204). Bale passage height 2 m 10.
– Runner feet strengthening the feed rack and allowing the «sliding» in the meadow just with the drawbar.
– Wide corrugate iron sheet enveloping roof of 2 m 25 – thickness 63/100e first choice.
– Swiveling «3 points» hitch Ø 102 to move the feed rack when completely empty.
– Delivered in KIT, not much voluminous, a single package, easy to assemble.
Model “4 FACES” : 2 m x 2 m with 4 identical sides, each with 3 head passages, that is 12 places, 1 opening side to receive a bale Ø 1 m 80 standing or flat.
Model “BIG BALL” : 2 m x 3 m, with 14 or 16 head passages (following to model). It has the same advantages than the “4 FACES” plus : 3 opening sides for a rectangular bale or 2 round standing bales, feeding trough and feet strengthened by central support, Intermediary truss in the middle of the roof, Rigid gutters reinforcing the roof and protecting the iron sheets and channeling water.
CORNER HAY RACK
Comfortable – designed to be fixed in the corner of a box at desired height. Aesthetic and sturdy, no agressive part – six fixing points – Anti-waste, sized to horses mouth – Fit one into the other for transport.
TELESCOPIC BARRIER EX4
Sturdy, economical and practical – quick installation – adjustable by eyebolt.
Gate: with 2 anti-return domed bolts – for places which need a frequent passage.
Panel: can be opened in both ways – locked by 4 pins – adjustable by 2 eyebolts.
TELESCOPIC BARRIER EX3
Made in pipe ∅ 60 mm. Telescopic part in pipe ∅ 49 mm. Spacers ∅ 49 mm adjusted for welding. 3 tightening grub screws, strengthened eyebolts ∅ 22 mm and 3 nuts on cross steel ring.
TELESCOPIC GALVANIZED FIELD BARRIER
For field coming directly from the famous telescopic barrierJourdain. It retains all theadvantageous : expandable, sturdy, multipurpose, light, it adapts to every dimensions from 0 m 60 to 6 m. Four elements”back”allow to close a passage from 2 to 6 mètres.height 1 m 15. adjustable hinge – Principal body Ø 42 mm. Expandable part in pipe Ø 34 mm with 3 tightening.
GATE VERSION :
Bent front frame made in only one piece,with 2 domed and anti-return bolts Ø 40 mm. Adjustable ±1 m.Suits perfectly when frequent opening is need. Easy and secure lock. Exists in 3/4 m, 4/5 m, 5/6 m (adjustable hinge), and2/3 m (fixed hinge).
PANEL VERSION :
Square front pipe 45 x 45, pin lock.Exists in 3/4 m, 4/5 m, 5/6 m (adjustable hinge), and 2/3 m (fixedhinge).
SERVICE GATE VERSION :
5 horizontal pipes Ø 42 mm and Ø 34 mm. height 1 m 15. Pin lock.Adjustable. Exists in60/100, 110/150, and 160/300.Parcatical and sturdy this barrieer can be installed on existing wood posts using standard latchs or on ourfamous Trèfleposts Ø 102 mm or Ø 140 mm with adapted strap.
Half netted fixed gate
Fixed field gate half netted with bolt Ø 20 mm on the axis of the upright